From MDOT Policy Manual
Jump to: navigation, search
Furnish and install vehicle traffic control signal heads and pedestrian traffic control signal heads.
Traffic Signal Heads       950.15
Aiming. Aim signal heads to be visible in conformance with the minimum requirements of the MdMUTCDMaryland Manual on Uniform Traffic Control Devices.
Aluminum, Polycarbonate, and Optically Programmed Signal Heads and Pedestrian Signal Heads furnished and installed will be measured and paid for at the Contract unit price per each section of signal head type and size as specified in the Contract DocumentsThe written agreement executed between an Administration and the successful bidder, covering the performance of the work and furnishing of labor, equipment and materials, by which the Contractor is bound to perform the work and furnish the labor, equipment and materials, and by which the Administration is obligated to compensate him therefore at the mutually established and accepted rate or price. The Contract Documents shall include the Invitation for Bids, Notice to Contractors, Instructions to Bidders, Proposal, Contract Forms and Bonds, General Provisions, Specifications, Supplemental Specifications, all Special Provisions, all Technical Provisions, all Plans and Notices to Proceed, also any written Change Orders and Supplemental Agreements that are required to complete the construction of the work in an acceptable manner, including authorized extension thereof. The payment will be full compensation for all lenses, mounting hardware, assembly, and for all material, labor, equipment, tools, and incidentals necessary to complete the work.