813 SIGNS

From MDOT Policy Manual
Jump to: navigation, search
813.01 DESCRIPTION.
Furnish and install signs as specified. Refer to Sections 802, 803, and 812 for sign supports.
813.02 MATERIALS.
Sign Panel Supports and Hardware       909.07, 921.05, 921.06, 950.04, A 123, A 153 and A 709
Reflective and Nonreflective Sheeting       950.03
Sign Materials       950.08
Provide all hardware not provided by the AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02.. Hardware shall be stainless steel. The AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. will supply traffic signal related signs and their mounting hardware for span wire, mast arm, and signal pole mounted applications.
Furnish and install, or install, vandalism installation date (VID) stickers to the back lower right hand corner of all installed signs. The AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. will supply VID stickers with all AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. supplied signs. Supply VID stickers with all non-AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. supplied signs.
813.03 CONSTRUCTION.
Use demountable copy or direct applied copy on extruded aluminum. Use direct applied or silk screen copy on sheet aluminum.
The signs will be inspected after sign installation is complete. If specular reflection is apparent on any sign, reposition the sign as directed.
Inspect each new sign location to determine if clearing is required to provide for good sight distance. Complete all clearing and disposal as specified in Section 101. Remove any tree limbs protruding within the limits of clearing as specified in Section 712. The limits of clearing for each location will be as specified.
Use the following minimum thickness for fabricated sheet aluminum signs.
Longest Dimension of Sheet Sign

in.

Minimum Thickness

in.

≤ 12 0.040
12+ to 24 0.063
24+ to 36 0.080
36+ to 48 0.100
> 48 0.125
Install sheeting in accordance with manufacturer’s recommendations. Repair/replace defects in workmanship per manufacturer’s recommendation.
813.04 MEASUREMENT AND PAYMENT.
813.04.01  Signs will be measured and paid for at the Contract unit price per square foot of area of the vertical front face of the completed sign with no deduction for required shaping. The payment will be full compensation for all material, labor, equipment, tools, and incidentals necessary to complete the work.
813.04.02  AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. furnished signs and mounting hardware will be measured and paid for at the Contract unit price per square foot for the completed sign installed. The payment will be full compensation for all transportation, drilling holes as specified, installation, and for all material, labor, equipment, tools, and incidentals necessary to complete the work.
813.04.03  Clearing for signing will not be measured but the cost will be incidental to the Contract unit price for furnishing and installing the signs.
813.04.04. Furnish and Install or Install Vandalism Installation Date stickers will not be measured, but the cost will be incidental to the Contract unit price for furnishing and installing the signs.