203 BORROW EXCAVATION

From MDOT Policy Manual
Revision as of 15:43, 3 April 2017 by Bgilardi (talk | contribs)

Jump to: navigation, search
203.01 DESCRIPTION.
Furnish, excavate, haul, and place approved materials for embankments and backfills when sufficient quantities of suitable materials are not available from other excavations specified in the Contract DocumentsThe written agreement executed between an Administration and the successful bidder, covering the performance of the work and furnishing of labor, equipment and materials, by which the Contractor is bound to perform the work and furnish the labor, equipment and materials, and by which the Administration is obligated to compensate him therefore at the mutually established and accepted rate or price. The Contract Documents shall include the Invitation for Bids, Notice to Contractors, Instructions to Bidders, Proposal, Contract Forms and Bonds, General Provisions, Specifications, Supplemental Specifications, all Special Provisions, all Technical Provisions, all Plans and Notices to Proceed, also any written Change Orders and Supplemental Agreements that are required to complete the construction of the work in an acceptable manner, including authorized extension thereof. This includes all work prescribed for backfills, embankments, subgrade, and earth shoulders, all necessary clearing and grubbing, the removal and disposal of overburden or other unsuitable spoil material, and the trimming, shaping, dressing, draining, and reclamation of the pit or location from which borrow material is secured. Refer to 201.03.02 before securing borrow.
203.01.01 ContractorAny person having a Contract with a procurement agency. Contractor does not include an employee with an employment Contract, or an employee organization with a collective bargaining agreement.'s Options. As a duly authorized agent of the AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02., select one of the following three methods to obtain borrow material for use on public highway contracts:
OPTION 1 - Acquire material from a licensed commercial operating supplier.
OPTION 2 - Make application to the Maryland Department of the Environment under the Annotated Code of Maryland, Environment, Subtitle 8, entitled "Surface Mining".
OPTION 3 - Make application to the AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. to operate under the standard adopted in conformance with the Annotated Code of Maryland, Environment, Subtitle 8, Surface Mining, Subsection 15-834 entitled "Exemptions". If this option is selected submit an application to the AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. fulfilling all the requirements of the cited subtitle.
Provide notification of the option selected to the AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02..
203.01.02 Notice to ContractorAny person having a Contract with a procurement agency. Contractor does not include an employee with an employment Contract, or an employee organization with a collective bargaining agreement.—Borrow Pits. If proposed, a borrow pit may be established on privately owned property. The AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. may grant an "Exemption for a Surface Mining Permit" normally issued by the Maryland Department of the Environment, Water Management AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. (WMA). Before a permit can be granted, submit written proof to the AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. that all local permits or approvals have been secured for the borrow pits.
An exemption under Option 3 will require approval of an excavation and reclamation plan along with the drainage patterns and methods of attaining satisfactory drainage and soil conservation as the work progresses. The plan shall provide for surface restoration suitable for the proposed subsequent land use after reclamation is completed and the proposed method of accomplishment.
203.01.03 Borrow Pits Within Jurisdictional Resources. Borrow pits located within tidal or nontidal wetlands, waterways, and 100 year floodplains require approval by the appropriate Federal and State Authorities. Obtain and provide all required permits.
If the pit is in operation and the AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. discovers that the work does not meet these regulations, the AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02. will notify the contractor to make the necessary corrections and all other operations shall cease until the work is in compliance.
203.02 MATERIALS.
Section 916.
203.03 CONSTRUCTION.
203.03.01 Clearing and Grubbing. Section 101.
203.03.02 Borrow Pit Material. Notify the EngineerAny person designated by the Administrator or the procurement officer, acting directly or through his duly authorized representative, such representative acting within the scope of the particular duties assigned to him or of the authority given him. at least 30 days in advance of the opening of any borrow pit so that soil analysis, elevations, and measurements of the ground may be made. After the pit is opened, use the excavated material only for the project intended. Do not excavate additional material for other purposes until a final survey is made of the pit.
203.03.03 Borrow Pit After Excavation. Meet the requirements of the Reclamation (Permit) Plan after the necessary quantity of materials has been removed. Avoid steep slopes and sheer faces. Seed and mulch all disturbed areas as specified in Section 705, at no additional cost to the AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02.. Shaping and seeding requirements do not apply to commercial borrow pits.
203.03.04 Borrow Excavation Beyond Specified Limits. Refer to 201.03.08.
203.03.05 Compaction. Refer to 204.03.04.
203.04 MEASUREMENT AND PAYMENT.
Borrow excavation will be measured and paid for at the Contract unit price per cubic yard for the pertinent Borrow item. The payment will be full compensation for clearing and grubbing, furnishing, excavating and hauling, sloping, draining and reclamation of pits (if Option 2 or 3 is selected), the formation and compaction of embankments, backfills, subgrade, manipulation and additives for select borrow, all work and materials for earth shoulders except as otherwise specified, disposing of all unsuitable spoil material, and for all material, labor, equipment, tools, and incidentals necessary to complete the work.
When requested by the ContractorAny person having a Contract with a procurement agency. Contractor does not include an employee with an employment Contract, or an employee organization with a collective bargaining agreement. in writing, the EngineerAny person designated by the Administrator or the procurement officer, acting directly or through his duly authorized representative, such representative acting within the scope of the particular duties assigned to him or of the authority given him. may approve an alternate method of measurement for the computation of borrow excavation quantities. This alternate method will not be considered for approval unless the ContractorAny person having a Contract with a procurement agency. Contractor does not include an employee with an employment Contract, or an employee organization with a collective bargaining agreement. can show that the cross section method computed by average end area is not a feasible method of measurement. When approved in writing, this alternate method will consist of measuring the borrow excavation in approved hauling vehicles. Refer to TC-7.01 and the following:
(a) Prior to the start of hauling operations, provide the identification number of each vehicle to be used. The EngineerAny person designated by the Administrator or the procurement officer, acting directly or through his duly authorized representative, such representative acting within the scope of the particular duties assigned to him or of the authority given him. will determine the water level capacity of each vehicle. The measured capacity will be multiplied by a factor of 0.85 to determine the pay volume.
(b) Furnish a delivery ticket to the EngineerAny person designated by the Administrator or the procurement officer, acting directly or through his duly authorized representative, such representative acting within the scope of the particular duties assigned to him or of the authority given him. for each load of borrow material delivered to the project with the information listed below. Only tickets signed by the EngineerAny person designated by the Administrator or the procurement officer, acting directly or through his duly authorized representative, such representative acting within the scope of the particular duties assigned to him or of the authority given him. will be used in the computation of the borrow quantity.
(1) The supplier's name.
(2) The AdministrationShall mean any one of the Administrations within the Maryland Department of Transportation, as listed in GP 1.02.’s Contract number.
(3) The date and ticket number.
(4) Vehicle identification number.
(5) Type of material delivered.
(6) Pay volume computed as specified in (a).